Automatic operation can not only improve the product quality, increase production efficiency, shorten production and logistics cycle, decrease the cost, raise economic benefits and relieve the labor intensity for the workers, but also play a significant role in enhancing the reputation and overall image of the enterprise.Taking the pursuit for practicability and reliability as the goal, the production line tries to lower the equipment cost and reduce the burden from one-off investment in the equipments by adopting new technical scheme.
MCCB 400A-800A series of molded case circuit breaker are applicable for the power distribution system of illumination and motor with 50Hz/60Hz alternating current, 230V/400V rated voltage and rated current smaller than 250 A, which can be applied in the overload of circuit and short-circuits protection.It can also be used in infrequent on-off electrical circuits under normal situations.In order to exert the maximum economic benefits in the actual production of the enterprise, the scope range of this automatic testing production line is shown as follows.
Rated current (A)PolesRated voltage (V)Frequency (Hz)Heat release typeBreaking type
400-800Atripolar, quadrupole230/40050/60power distribution type, motor typeL type
1.2 Technical requirements
According to the design principle and product details, the design requirements and technical parameters of this production line are shown as follows.
1.The output of a single automatic testing production line for MCCB- 400-800A series of molded case circuit breaker within 8 hours is 400 pieces.It should adapt to the production of tripolar or quadrupolar circuit breaker.The N pole (the fourth pole) is not tested on the production line.
2.This production line mainly finishes the following processes, namely manual assembly, manually pasting bar code, magnetic test, manual heat test, manually assembling arc extinguish chamber, handle, roof cover, distance piece, screw and etc, reliability operation test + automatic pressure testing, and hand filling.
3.The unqualified products will be removed from the production line automatically for the convenience of manual repair, which can adopt integrated repair method.
4.2.0-2.5In equivalent current is adopted in heat test for three-phase series of the products.When evaluating the work pace of production line, the heat check power-on time shouldn't be longer than 210 seconds.
The magnetic check specification for the power-distribution circuit breaker is that, if there is no action within 200ms, it should be 80% ten times of the rated current.While if there is action within 200 ms, it should be 120% ten times of the rated current.The magnetic check specification for the motor-type circuit breaker is that, if there is no action within 200ms, it should be 80% ten times of the rated voltage, while if there is action within 200ms, it should be 120% ten times of the rated voltage.
5.Magnetic constant flow source:Current 2000A-12000A, current precision ≤ ± 3%.Heat constant flow source:Current 300A-2000 A, current precision ≤ ± 3%.
6.The overall design for the production line is a combination of standing posture, manual assembling and automatic testing.The foot margin of each testing unit adopts adjustable wheel foot, for the convenience of moving, assembling and debugging of the production line.
|1The artificial assembly (10 stations)||2.Automatic mechanical run-in (1 station)||3.Automatic tripping force trip itinerary, automatic on detection distance overtravel detection (1 station)||4.Automatic loop resistance, resistance end pressure detection, synchronization (1 station)|
|5.Instantaneous automatic detection (1 station)||6.Manually adjust the double gold detection (1 station)||7.Automatic delay calibration (5 stations)||8.Cooling zone (1 station)|
|9.FThe artificial assembly and the closing lid (2 stations)||10.Finish ProductPrinting||11.The artificial assembly and packaging (2 stations)||12.Plastic closures and packing station (station|
1,Shipping can delivery by sea,air,or express according to customer requirement
1.Small order under 3000USD T/T100% in advance
2.30% deposit and 70% before shipping or after received copy of B/L
3.L/C also acceptable
We provide 1 year warranty.
Why Choose Us?
1.Client's benefit first
The reputation of our company is much more previous than the profit of business!
Have been focusing on this line especially for more than 10 years!
4.Fully guaranteed quality
We are a professional art production plan promotion company,have manufacturer specialized in low-voltage electrical appliance, gathering research, manufacture, distribution and service as a whole.Our production line can be customized size according to the customer's workshop and provide worker training in assembly process, detection technology and so on , also provides products customized development and all of the parts of MCB.RCBO,MCCB,production line,testing line.
Contact Us Today
We always pay attention to protecting the benefits of clients so that both the clients and our company are able to gain the maximum benefits from the relations between us.We warmly look forward to establishing, reinforcing and expanding long term fruitful relationship with the reliable clients all over the world.
Let's get busy and pull together to create a better future.